[Installing Mode:]

The LEDNEON -FLEX is a versatile and user-friendly lighting device; it can be cut and bent and formed in the field and easily installed on the flat surface of varied materials, such as wood, plastic, steel, or wall, etc. to form all kinds of pattern according to your design. And it can be easily connected to the power supply and then performs well.

• It is recommended to mark centerlines or draw the outline of your pattern on the surface of your desired positions.
• Secure mounting clips on the centerlines at appropriate intervals with screws, if there are curves; It is better to secure mounting clip on each curve and between.
• Insert the light body into the mounting clips with the lighting parts upward.
• Connect each part together.

When using outdoor use portable lighting products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for LN-FX only having built-in GFCI protection receptacles can be used.

• Read And Follow All Safety Instructions.
• LN-FX must be cut only on the indicated mark.
• Before connecting with connectors, bending LN-FX rightwards and leftwards, Extra copper wires need to be cut with nippers.
• Ensure LN-FX and power source have the same voltage.
• Pay more attention on the polarity, when connecting two pieces.
• Do not use if there is any damage on LN-FX or cord insulation, Inspect periodically.
• Do not submerge LN-FX in liquids, or use the product near any water source.
• Do not secure this product or its cord with staples, nails, or like means that may damage the insulation.
• Do not subject LN-FX to continuous flexing.
• If the paint on the light body is damaged, please use adhesive tapes or fabrics with reflective and fireproof property to cover the lower part of the light body to prevent light leakage